Kala KA-RES-CHR Tenor Resonator Ukulele REVIEW

4 Nov 2014

Kala KA-RES-CHR Tenor Resonator Ukulele REVIEW

I have not reviewed a resonator ukulele before despite having played a fair few, so thanks to Kala and Omega Music for loaning me the Kala KA-RES-CHR Tenor resonator!


Kala KA-RES- CHR Tenor Resonator ukulele


I must say from the off that I find the world of resonator ukes a little odd. Not only do I prefer steel strings on resonators (i.e. guitars, played with slide), but the range of uke resos is really a bit split. On the one hand you have the lower priced models at around £200 to £300, and then you have a pretty large leap to get to the higher end models from the likes of National and Beltona. There is pretty much nothing in the middle (if you know of one, do let me know). To add to the oddness, the lower end resonators I have played have all left me wanting - sounding rather thin and rattly. At the upper end on the other hand, I at first thought Nationals were sublime, but that was until I had a chance to play a Beltona which, in my opinion, left the National in the dust. Now, unlike regular ukes, there seems to be nothing in the middle ground at say £500 ish - a kind of semi pro resonator if you will. This Kala is priced at around $300 or £220 in the Uke, so how does it fare?

The Kala reso is a wooden bodied instrument, unlike the (perhaps) more common metal bodied resonators, and at first glance I think it looks tremendous. It is made from laminate mahogany in the body (solid wood not being felt necessary as all the tone resonance is coming from the resonator unit) and is finished in a kind of vintage semi sunburst finish. This is repeated on the two piece sides and even more pronounced on the arched back. Top and back join the sides along with some nice looking pearloid edge binding.  The top is also finished with traditional F holes which add to the vintage look.

Kala KA-RES- CHR Tenor Resonator ukulele sides


The whole body unit is put together very well and has a satin finish that both looks and feels great in the hands. It's also quite light to hold considering all that metal work, which is a nice thing.

And on to that metal work - the resonator unit itself. The Chrome cover (they also do one in Brass finish) is adorned with a fairly simple range of drilled sound holes in five distinct sections. It is not overly fancy but I prefer that myself. It uses a biscuit bridge with a maple saddle on to the spun aluminium cone. Unlike some reso ukes, this has no separate tail piece to attach the strings to, rather a plastic strip screwed to the cone cover to tie them on to. I think I would have preferred the former.

Kala KA-RES- CHR Tenor Resonator ukulele cone


Up to the hardwood neck, this to has an aged finish on the back which I personally think is a little overly done and would have preferred a more softly graded change in colour. On to this is fitted a rosewood neck with some slight colour variation toward the upper frets. The edges look to be bound, and we have 18 frets in total with 14 to the body. Fret markers are inlaid pearloid at frets 5, 7, 10 and 12 and pleasingly these are repeated on the side of the neck. It isn't the shallowest profile neck I have seen but equally not a wide nut either - fairly typical Kala to my hands.  It seems to be made from 'at least' two pieces with a clear join at the heel, but the dark staining at the headstock end makes it hard for me to determine any other joints.

Kala KA-RES- CHR Tenor Resonator ukulele neck


Kala KA-RES- CHR Tenor Resonator ukulele fingerboard

The nut is made of Nu-Bone  before we head up to the typical Kala shaped headstock. The face of the headstock looks stained rather than capped but I am happy to be proved wrong. The Kala logo is nicely inlaid in pearloid material and all is very neat and tidy. Tuning is provided by sealed geared tuners with small chrome buttons that all work just fine. And (of course) the package is completed with a set of Aquila strings.

Kala KA-RES- CHR Tenor Resonator ukulele tuners


All looks very reliable and well put together, and therefore 'very Kala'. I really do adore the look of the instrument and cannot find anything much to dislike about the build. (I cannot really see much inside through the F holes, apart from the Kala label, but it all feels solid.)

Kala KA-RES- CHR Tenor Resonator ukulele headstock


But before we go on to the sound, lets revert back to my comment on my thoughts on cheaper reso ukes. You see it really is all about the build with a resonator, and in particular the cone arrangement.  Better quality hand spun cones cost more but also sound more rounded and warm. But the ukes that use them cost considerably more too.  So I will admit to thinking that his one would let me down as some of the other cheap reso's have done.

Well first up - it didn't, or at least not totally. To me it sounded far better than models I have played from the likes of Asbury or Republic. It also came very nicely set up with no tuning issues or adjustment required to the nut.

Kala KA-RES- CHR Tenor Resonator ukulele body


The sound is bright and a bit overly so for my ears. Played picked it has a kind of slap back type echo to the picked notes which annoyed me, and strummed was kind of warbly and muddled for my tastes. Some reso players may read this and say - 'of course its trebly - its a reso - but I would just suggest they play some higher end ukes to find some more warmth. (And by that I do mean Beltona or perhaps Mya Moe as I really havent taken a shine to Nationals myself). To me though, this one sound that little bit artificial sounding. That could of course be down to the strings and this begs experimentation - but alas, it is not mine to keep!

But there is good here too - it plays very well, has great projection and as I say, looks great to my eyes. I think though I would have to file it in the try before you buy category - but they I would do that with any resonator, particularly if you haven't played one before. Perhaps it sounds like I am being a little harsh, but that again brings me back to that middle ground of a dearth of entry level pro resonators. It's a great stand alone instrument but perhaps I have been spoiled.


PROS

Looks
Build quality
Volume

CONS

Slightly thin, trebly echoey sound
Finish on the back of the neck
Tail piece arrangement


SCORES

Looks - 9
Fit and Finish - 9
Sound - 7
Value For Money - 8

OVERALL - 8.3 out of 10

To understand my review scoring and see this result in context - visit my review page at

VIDEO REVIEW

7 comments :

  1. What struck me on first impression was how light it was for a reso; appreciably lighter than my Argapa soprano resonator, and I thought that was light.

    No doubt that's got a lot to do with the different woods used (solid ash & alder in the case of the Argapa). I doubt if there's very much difference in the weight of the cones (the Argapa uses one of Colin Oldham's Delta resonator cones), but I stand open to correction on that point.

    If you're used to resos weighing the same as a small car, it's a very pleasant change.

    ReplyDelete
  2. Following on from my comment about its weight, what's your opinion on the action? High, average, low?

    ReplyDelete
  3. Yeah - it is light Paul - but then I find the Beltonas light too.

    As for the action - just how I like it - didn't measure it and now packed away but its just over 2mm at 12th I would guess. very playable

    ReplyDelete
  4. Thanks. I've never had the opportunity to play a Beltona. The few Nationals I've played all weigh a ton. The reason I asked about the action is that on the Argapa (my only real point of comparison) it's very low: just about 1mm at the 12th. I'm told that low action is quite normal on a reso - and to expect it to get lower as the cone settles!
    (don't know why I'm popping up under different aliases btw)

    ReplyDelete
  5. That's about answered the question as to whether I should invest in a Kala resonator or not. My wallet (and no doubt my wife) thank you.

    As for the in between resos pricewise, were you aware of the Wailing brand? (www.wailing-guitars.co.uk) I've no experience of them at all, but thought them worth a mention.

    ReplyDelete
  6. Received mine from Omega a couple of weeks before Christmas and I'm very pleased with it. I took your review into account but always knew I wanted it with a low G. Matt at Omega recommended Savarez strings, but presumably because they don't do an unwound low G, they strung it for me with a low G by Worth. I think the result is a punchy tone with a good sustain provided by the resonator.

    ReplyDelete
  7. Opted for worth clear strings low G.....finger picked...lightly strummed.....it's very good..early blues...carter family stuff

    ReplyDelete

Please leave me a comment!

Help Support Got A Ukulele

Please Help Keep This Site Going!

If you enjoy this blog, donations are welcomed to allow me to invest more time in bringing you ukulele articles. Aside from the Google ads, I don't get paid to write this blog and for reasons of impartiality a not sponsored by brands or stores. Your donations all go back into the site to allow me to keep bringing you reviews, and in the end the ukuleles acquired are given to local schools and charities.