Does The Finish On A Ukulele Affect The Tone?

22 Feb 2017

Does The Finish On A Ukulele Affect The Tone?

A question you may have asked yourself.  Does the finish on a ukulele affect the tone? And I thought long and hard whether to dip my toe into this pool..

ukulele gloss finish




The reason for my caution, is that this is one of those subjects that has plagued guitar forum discussions for years, and usually results in less than clear views and plenty of arguments on both sides. The discussions often become quite heated as people with their own views slug it out, but never really reach a conclusion.  But as I thought about it for ukulele, there is actually a single very basic answer to this question, then that is followed by a longer answer that partially contradicts the simple answer. See what I mean?

Let's deal with the simple answer first - does the finish affect tone? Well yes, it does. It has to. Adding a finish on to a ukulele, particularly on the soundboard (which is the part of the ukulele that does most of the vibrating to create tone) must add mass to it and affect it. Of course how much it affects it, and whether it affects it for better or worse brings us on to the more longwinded answer... But yes, adding finish to a body of an instrument does affect tone insofar as it changes it.

So why do they add them? Well it's a mixture of changing the looks, particularly at the high end instruments, and a case of hiding a plain wood at the lower end, coupled with an overall level of protection no matter the price point. The difference between higher end finishes and those at the low end though is night and day. A luthier built instrument may use gloss to really make the wood grain pop, but a thick plastic paint finish used by the cheapest Chinese abomination is usually to hide the very unnactractive plywood beneath it.... In both cases though a gloss can provide much more protection to wood than a plain or oiled finish. It stands to reason.

But as I say those finishes can vary extremely widely. There is a world of difference between thick gloss paint, (or thick gloss varnish for that matter) at one end of the scale and a professionally applied and sanded back gloss on a higher instrument. Added to that there is a world of difference between gloss and a satin finish, or a hand rubbed oiled finish. Progressively, out of those options, whilst they are all finishes that cover bare wood, they tend get progressively thinner and lighter. I've discussed this topic with a luthier at one of the most well known Hawaiian Ukulele brands and they are of the view that their satin or oil rubbed instruments sound much more natural because the finish is so much thinner. If you think about it, Violins are almost never finished in high gloss for the same reason. Just his opinion of course, but when a top brand luthier tells you that, you kind of listen. He did, however, recognise that there are plenty of people who prefer a gloss finish, and in reality the difference was extremely subtle and subjective.

Now, the quality of the finish also has an awful lot to do with this impact. If gloss finishes were so bad, high end luthiers and ukulele brands wouldn't use them at all would they? Well, yes and no. Years ago gloss finishes were less common on ukuleles, and those that were available were a heavier form of nitrocellulose that could easily be applied too thickly. More often, vintage ukuleles are finished in either oil or a french polished shellac. Equally that is in part to do with facilities and the hassle involved in creating a spray booth gloss finish..  In fact, going back in time there are also some woeful guitars from some of the worlds very best brands that were made with massively thick gloss coatings that some say really muted the tone (and with age, started to yellow and crack). Things these days are quite different, and technologies like UV cured poly glosses, such as those used by Kanile'a can be applied extremly thinly, but still be extremely strong and glossy. Quite a difference to the older thicker glosses. So these days a good luthier can absolutely create a thin gloss that adds very little mass to the body of the instrument. But that costs because it takes time and a lot of effort. Sadly, at the other end of the scale, any fool can thickly apply gloss and make an instrument shiny, but in doing so, the finish is ultra thick and equally unattractive.

So as you can see we are starting to see the other complexities in finishes that mean that they are not all equal. And because they are not all equal, the answer to the question cannot be just as simple 'yes it does affect tone'. This brings us on to the second answer, which is that 'it depends on so many more variables'.

You see, no matter what the finish type, there are other things in play here which have a significant effect on the tone of an instrument such as the wood type, the quality of the tonewood, the quality and lightness of the build, the bracing pattern and many more. It's simply impossible to compare a gloss instrument to an oiled instrument and come to a fair view on what the finish is doing to them. In fact, I would wager that you couldn't fairly make a comparisong between two identical models, one satin and one gloss and point to the finish making a difference in the tone, as the woods in the instrument will be slightly different. Can you hear a difference in a side by side test like that? Well, yes youmay be able to, but what I am saying is that there still may be more subtle construction differences that are affecting things too. And of course, if that finish IS affecting the tone, whether it is affecting it for better or worse is purely subjective. Completely.

ukulele thick painted finish


To sum up though, and hopefully provide you with the advice you were hoping to receive, I would say the following:

1. No matter the instrument, a heavier coating (whether gloss or paint) is going to reduce the top vibration.  It just will.

2. On higher end instrument gloss finishes, this effect on vibration is likely to be much more minimal because the gloss tends to be applied professionally and very thinly. In fact, the effect may actually improve the tone to your ears! I do often hear people say that they prefer the sound of the gloss version to the satin, and vice versa.

3. On cheaper end instruments however, these glosses and paints tend to be applied overly thickly. With a lower end instrument, the construction build may already be overly heavy (thick laminates, heavy braces etc) and the last thing an instrument like that needs is yet more material affecting the vibration of the top. It's why on cheaper instruments I would almost always avoid gloss or heavy finishes. In short, if you are spending little on a ukulele, go for the plainer finish every time.

4. Ultimately though, the impact is completely subjective, and if you do like the look AND the sound, then it follows that you like the instrument. No matter what it is covered with. It's ok to like one or the other!

5. Don't however overlook the role that gloss can bring to protect a ukulele. Whilst gloss itself can scratch, from the action of fingernail strumming, belt buckles and zippers, it is usually just the gloss that is wearing. Trust me, as the owner of a high end, oiled finish ukulele, they DO pick up strumming marks directly into the wood more than gloss instruments do. Personally that doesn't bother me as the ukulele still works and such marks show that it has been loved. Some people though prefer to keep their instruments looking like museum pieces..

Oh and as a final point. Adding stickers or hand painting with acrylic all over your ukulele will CERTAINLY mute the sound. If you want to do it, go for your life, it's your ukulele... Just know the risks and try to bear that in mind when advising other people to do the same. Personally, I prefer a ukulele to resonate as freely as possible, not as little as possible.





15 comments :

  1. Nice summary.I've a Kala Tenor with a deep high gloss, it has a nice 'classical guitar' mellow tone. Good for some stuff. And a Cordoba Tenor with a VERY thin matt finish which is bright as a button. Good for other stuff. Like them both. Except.. the Cordoba surface damages extremely easily. What's that best way of adding a 'sensitive' sensible additional finish/coat/whatever to the the top surface? Not of fan of pick guard type things? Ta

    ReplyDelete
    Replies
    1. I recently bought 6 tenors to compare. Like Keith M., I am really liking the sound of the high gloss spruce top Kala and of the satin/matte mahogany top Córdoba. BUT...I am seriously considering removing some of the thick gloss from my Kala. Just to see what happens. Thanks for another great, informative and interesting article.

      Delete
  2. I've never found a good home solution Keith, short of paying for an expensive re-finish. I tend to work on the basis that ukuleles WILL get scratched, and stopped worrying about scratches many years ago!

    ReplyDelete
  3. Point. May have to control my perfection urges until it gets to the 'full service' position!

    ReplyDelete
  4. I've always perceived the tone of a well-made satin-finished uke to have a dryness to its attack, while perceiving a well-made gloss-finished uke to have a more rounded, refined tone. To me it's similar to the difference between Aquila strings (dry) and fluorocarbon strings (refined).

    I'm also aware that the perceived difference might be completely in my head. We instrument enthusiasts have a tendency to hear with our eyes and our preconceived notions.

    ReplyDelete
  5. In my very limited experience from what I have read I thought that a gloss finish resulted in a brighter tone?

    ReplyDelete
  6. Some people say so - some people don't. Not exact science.

    ReplyDelete
  7. Interesting topic and one I've considered. Aesthetically, I prefer a satin finish so I wouldn't go for the gloss to achieve a certain sound. I like the look and feel of the the wood grain (which I suppose you might still get on a high end gloss).
    If you really want to go down a rabbit hole you could look at whether a slippery gloss finish affects the way you hold it, the likelihood you'd use a strap and install strap buttons and how that affects the sound, etc, etc! Kidding.

    ReplyDelete
  8. Without wanting to get bogged down in the whole tone hornets' nest style debate, if a relatively thin coating layer can influence tone, why is it often argued that the tyoes of wood used in the layers of laminate ukes make no difference to the sound? Just wondering... Mike

    ReplyDelete
  9. The usual mistake people make about laminates is that the thin outer veneer carries some sort of tonal character typical of the wood in question. That is wrong - it doesn't. Different laminates absolutely have different tones, but that thin outer layer cannot really ever project the typical character of the solid version into the laminate. So yes, laminates can change tone, but can they re-create tone of their solid variety - nope. Glosses are different - the post is about whether they affect tone - but not necessarily for either better or worse.

    ReplyDelete
  10. Hi Keith, when I was in Japan a couple (3) of years ago I went into a uke shop out in the stick, they made their own ukes, they were beautiful, I tried a few out and as they handed it over to me (with their white gloves on) they put a clear flexible thin plastic type panel (like a pick guard) on it. it appeared to stick by static electricity as it sort of sucked its self on the the uke and when I had finished, they swapped it to the next one. Didn't buy one as the price was NZ$3000-5000

    ReplyDelete
  11. I built a Uke kit. Finished with lacquer and it sounded nice and resonant. I added a sticker for my granddaughter and added another coat. Re strung and it was terribly muted. I first thought the bridge was the problem as I left it in masked. But I scraped the finish off under the nut but no affect. I think the sticker which was metallic and about 4” is the issue. I put on a crisper set of strings and it helped but it’s still muted.

    ReplyDelete
  12. Hi Barry
    Thanks a lot for your detailed elaboration! I´d like to buy a tenor ukulele and have been struggeling for weeks to choose either a gloss or one without and of course i had read a lot about it. But as you said there never was a real conclusion (at least for me). And because i´m able to spend "only" smt. about 300 up to 400 Euros, so not an high-end instrument, i decided to take on without gloss.
    So again, thank you very much, your representation helped me to decide

    ReplyDelete

Please leave me a comment!

Help Support Got A Ukulele

Please Help Keep This Site Going!

If you enjoy this blog, donations are welcomed to allow me to invest more time in bringing you ukulele articles. Aside from the Google ads, I don't get paid to write this blog and for reasons of impartiality a not sponsored by brands or stores. Your donations all go back into the site to allow me to keep bringing you reviews, and in the end the ukuleles acquired are given to local schools and charities.