Ukulele Beginners - Wood types and their influence on sound

14 Feb 2011

Ukulele Beginners - Wood types and their influence on sound

In your hunt to purchase a ukulele you will have noticed that there are a variety of different wood types you can buy - but how do they affect the sound?


In this guide I will give you my views on how the wood used in a ukulele affects the sound. This is in respect (in the main) of solid top instruments, not laminates. Laminates do vary by wood type, but the differences tend to be more in respect of how good a quality laminate it is. Solid woods though can have a big impact on the sound of the instrument.

(for more on woods - see my guides on wood here - Ukulele wood & More about ukulele wood )

Firstly, there is no right and wrong when it comes to wood types, and there is certainly no "best" wood.  All woods differ and they sound they make has also got to be something you like the sound of.  What sounds best to your ears may be different to mine.  That said, I list below some of the main wood types you will encounter when ukulele shopping and their common characteristics.

MAHOGANY


One of the most common woods in ukulele making, it has a reasonable grain finish providing good looks, but provides a good balance between the bright trebly sounds the ukulele is famous for, whilst beefing up the bass sounds a little too. Also projects sound well with good volume. Its also cheaper than many other tonewoods, and as such provides, in my opinion, the best value for quality.

KOA


Koa is a Hawaiian hardwood, and a ukulele wood held in very high esteem in those islands. The wood is beautiful to look at with amazing grains (particularly the curly variety), and provides a sound that suits the ukulele perfectly. Very sweet sounding and warm. Loud rich, and used in the finest ukuleles, but very expensive. Koa instrument prices show the premium!

CEDAR


A common, reddish soft wood often used in acoustic guitars, cedar has a plain finish, and provides a very warm sound, evenly distributed amongst the strings. To my ear, a little too muddy sounding for the ukulele for which I appreciate a bit more treble, but a good wood nonetheless.

SPRUCE


A very common, pale yellow wood used in guitar manufacture. Now seen on many cheaper ukuleles on the top only (usually with rosewood or mahogany backs and sides). It is a tough wood that makes for excellent strong soundboards and the Sitka variety is characterised by a very bright and rich tone, with less of the bass rounding that Mahogany provides. They are also very loud woods, but a touch TOO bright for my ears. Engelmann spruce is a slightly more mellow version which is often used in classical instruments.

MAPLE


A hard, resilient wood that is often chosen for its dramatic looks, particularly flamed or spalted woods that are stunning to look at. It provides a very very bright tone on the ukulele.

MANGO


A beautiful looking, orange wood with beautiful grain, that is used increasingly as a more sustainable wood choice (as Mango is a fruit tree, the wood is harvested after the tree is no longer efficiently producing fruit, and is then replanted). Mango provides a warm yet bright tone, similar to walnut.


OTHERS


The woods above are amongst the most common you will find, but there are many others, each with differing properties (too many to go into in this beginners guide!) including Bubinga, Acacia, Lacewood and Myrtle. If you are going into the exotic wood direction, speak to a maker and ask opinions on sound, or better still, play before you buy.

6 comments :

  1. This post would have been very useful when I was last buying a uke as I was looking for my first solid instrument, and I couldn't find anything on the net that described this as succinctly as you do above.

    I ended up buying a Kala Travel Uke with only the top being solid - spruce. I concur with what you say about its bright sound, but that actually suited me very well as I bought the concert model and the brightness means it still sounds very 'ukey'.

    ReplyDelete
  2. Simon - thanks for your kind words. The Kala travel is a great uke in my opinion. The thin body works well with the spruce top to help with the volume.

    Keep strumming!

    Baz

    ReplyDelete
  3. Barry - what is the best for warm deep sound; cedar on the top and koa for the side and back OR mahogany solid.

    Thanks

    ReplyDelete
  4. I have a ukelele that was made for me by my grandfather. He made the body from pine and black wallnut stripes along the top and a bird's eye maple bottom. I believe he used a type of mahogony for the sides and it sounds very good.

    ReplyDelete
  5. I'm about to purchase my first ukelele for a uke class I'm taking this summer. I'm going at this blind, as I have no previous experience with this instrument. Thanks for this article; it helped relieve my buyers stress.

    ReplyDelete
  6. Hi, I've got A new UKe.By the way, I love this page. Thank yo uso much for putting such effort for all information. So yeah, a got a Uke and it is made of Fiberglass.it's pretty light.

    ReplyDelete

Please leave me a comment!

Help Support Got A Ukulele

Please Help Keep This Site Going!

If you enjoy this blog, donations are welcomed to allow me to invest more time in bringing you ukulele articles. Aside from the Google ads, I don't get paid to write this blog and for reasons of impartiality a not sponsored by brands or stores. Your donations all go back into the site to allow me to keep bringing you reviews, and in the end the ukuleles acquired are given to local schools and charities.